Holeshot Practice Race Gate by Risk Racing with a faded out MXer lining up to practice

Holeshot Practice Motocross Starting Gate

Holeshot Practice Motocross Starting Gate wireless remote closeup shot

Holeshot Practice Motocross Starting Gate 3 panel explainer

Vendido

Puerta de salida de motocross de práctica Holeshot

Name: Puerta de salida de motocross de práctica Holeshot
Brand: Risk Racing
SKU: u-77839-SD/RF
Price: 249.99 USD
Availability: OutOfStock

$249.99$299.99

THIS IS A SCRATCH & DENT ITEM

For more scratch & dent info and expectations click here

Características
Especificaciones
Incluido

- Secuencia de caída de tiempo aleatorio
- Controlado electrónicamente
- Señal inalámbrica - Operada por el usuario
- Vincule múltiples puertas para practicar “barra a barra”
- Función “Instant Drop” para usar con el entrenador
- Construcción muy duradera: utilizada por los profesionales.
- Reinicio fácil
- Funciona también con Quads
- Conseguir el Holeshot = Conseguir el podio...
- Modelo # 77839
- 8 pilas AA (no incluidas)
- Botón de inicio remoto inalámbrico (incluido)
- Tamaño: 36” x 29” x 5” (91,44 cm x 73,66 cm x 12,7 cm)
- Peso: 18 libras (8,2 kg)
- 1 año de garantía
- [1] Puerta de carrera Holeshot
- [1] Control remoto inalámbrico
- [1] Cable de enlace
- [1] Cable de caída instantánea de 6'
- [4] Estacas de montaje

Consigue salidas ganadoras en el podio

Conseguir un disparo es fácil, ¿verdad? ...Mal, pero la mayoría de las carreras se ganan y se pierden al abrir la puerta, por lo que perfeccionar tu técnica de salida es clave para cualquier corredor de MX que quiera estar en el podio. Mejore su tiempo de reacción y aprenda a controlar la potencia desde la puerta hasta la primera curva.

Práctica fácil

Inicio remoto

El "Holeshot" es una puerta de salida de práctica inalámbrica, electrónica y cronometrada completamente al azar. Este producto innovador permite a los ciclistas practicar sus salidas de forma independiente. Cuando el ciclista presiona el botón del control remoto inalámbrico montado en la barra transversal, se activará una secuencia de sincronización controlada por computadora que hará caer la puerta al azar.

Tiempo aleatorio

Después de presionar el botón del control remoto, se iluminará un LED verde en la puerta. Esto le permite al ciclista saber que la puerta ha recibido la señal y le da 2 segundos para volver a colocar sus manos en las barras. Luego, el LED se volverá rojo y comenzará a parpadear. Cuando comienza a parpadear es como si el tablero de 30 segundos girara hacia un lado. ¡Prepárate porque la puerta ahora caerá aleatoriamente entre 1 y 5 segundos, como un AMA Pro National!

Reiniciar

Restablecer la puerta es tan fácil como pasar y pisar la parte trasera del aro sin desmontar. Se pueden vincular varias puertas electrónicamente para practicar golpes de barras con varios corredores. Simplemente conecte varias puertas entre sí usando el cable de conexión suministrado y todas las puertas caerán al mismo tiempo usando una señal temporizada aleatoria desde un botón remoto.

Caída instantánea

El Holeshot también tiene una nueva función de “caída instantánea”. Si está utilizando un entrenador, padre o compañero de equitación para practicar sus salidas y desea omitir la secuencia de tiempo aleatoria para controlar la secuencia de caída, puede conectar el botón remoto directamente a la puerta. Simplemente conecte el cable de 6 pies de largo suministrado con su puerta directamente al botón remoto y al lado de paseo de su puerta. Esto eliminará automáticamente la señal inalámbrica y la secuencia aleatoria. La puerta bajará tan pronto como se presione el botón.

Vincular varias puertas

¡Unir varias puertas es fácil para practicar de barra a barra simulando salidas en un entorno de carrera!

Genial para quads

Al vincular dos Holeshot Race Gates, también es fácil practicar salidas de carrera en tu quad.

Entrenamiento de circuito profesional con Holeshot Gate

Utilizado por los mejores equipos de carreras profesionales.

Características

Secuencia de caída de tiempo aleatorio

Controlado electrónicamente

Señal inalámbrica - Operada por el usuario

Vincule varias puertas para practicar "barra a barra".

Función “Instant Drop” para usar con el entrenador

Construcción muy duradera: utilizada por los profesionales.

Reinicio fácil

Funciona también con Quads

Conseguir el Holeshot = Conseguir el podio...

Qué está incluido

Puerta de carrera Holeshot

Botón remoto

más 1 cable de conexión, 1 cable de "caída instantánea" de 6', 4 estacas de montaje

Proposición 65 de California ADVERTENCIA:
Este producto puede exponerlo al bisfenol A, que en el estado de California se sabe que causa defectos de nacimiento u otros daños reproductivos. Para obtener más información, visite www.P65Warnings.ca.gov .

Social Media

Tag Us To Get Featured

Join the convo with #RiskRacingMoto

User Generated Content of the Holeshot motocross practice gate

Get Podium Winning Starts

Getting a holeshot is easy right? ...Wrong, but most races are won and lost at the drop of the gate, so perfecting your starting technique is key to any MX racer who wants to be on the podium. Improve your reaction time and learn to control power out of the gate and into the first corner.

Practice Made Easy

Remote Start

The “Holeshot” is a completely random timed, electronic, wireless, practice starting gate. This innovative product allows riders to independently practice their starts. When the rider presses the wireless remote button mounted on their crossbar pad, it will activate a computer controlled timing sequence which will drop the gate randomly.

Random Timing

After the remote button is pressed a green LED will illuminate on the gate. This lets the rider know the gate has received the signal and gives the rider 2 seconds to get his or her hands back on the bars. The LED will then turn red and start blinking. When it starts blinking it is like the 30 second board turning sideways. Get ready becuase the gate will now drop randomly between 1-5 seconds, just like an AMA Pro National!

Reset

Resetting the gate is as easy as riding by and stepping on the backside of the hoop without dismounting. Multiple gates can be electronically linked for multi-racer, bar banging practice. Simply plug multiple gates into each other using the supplied linking wire and all the gates will drop at the same time using a random timed signal from one remote button.

Instant Drop

The Holeshot also has a new “Instant Drop” feature. If you are using a trainer, parent or riding buddy to practice your starts and want to bypass the random timing sequence in order to control the drop sequence, you can plug the remote button directly into the gate. Simply plug the 6 foot long cable supplied with your gate directly into the remote button and into the ride side of your gate. This will automatically eliminate the wireless signal and random sequence. The gate will drop as soon as the button is pressed.

Link Multiple Gates

Linking multiple gates is easy for bar-to-bar practice simulating race environment starts!

Great for Quads

By linking two Holeshot Race Gates together it's easy to practice race starts on your quad too.

Pro Circuit Training with the Holeshot Gate

Used by top Pro Race Teams

Features

Random timing drop sequence

Electronically controlled

Wireless signal - Rider operated

Link multiple gates for “bar-to-bar” practice.

“Instant Drop” feature for use with trainer

Very durable construction - used by the Pros

Easy reset

Works with Quads too

Getting the Holeshot = Getting the podium...

What's Included

Holeshot Race Gate

Remote Button

plus 1x linking wire, 1x 6' "instant drop" cable, 4x mounting stakes

Frequently Asked Questions

◄General Troubleshooting

Proper function for the gate:

When the power switch is turned on, you should immediately see an L.E.D. blink quickly, green then red, then the L.E.D will go blank until the remote is pressed.
When the remote is used in the wireless capacity it will function as follows…When the remote is pressed a green LED will light up on the electronics for exactly 2 seconds (This gives the rider the chance to put his or her hands back on the bars). Then the LED flashes RED. This is like the 30second card turning sideways in a real race, which means the gate will drop RANDOMLY between 2-5 seconds.
When the remote is wired into the gate using the supplied 6 foot cable the gate is designed to drop instantly. As soon as the button is pressed the gate should drop. (The lights may still blink, but it means nothing).

If your Holeshot gate is not working, the first thing to check are the batteries. Please ensure you have installed a total of 8 NEW “AA” batteries (Old batteries from around the house will not work. The gate requires a full 12 volts to drop so new batteries are important). Make sure you have all 8 batteries installed correctly.

◄Does the gate have power?

To determine if your gate has power, simply turn the power switch off (switch in the up position), and wait 5 seconds before turning back on. When you switch the power button into the “ON” position you should see an L.E.D. blink quickly, green then red, then the L.E.D will go blank. If you see the LED blink then you know that you have power to your gate. Please note, the LED’s may blink with low batteries. The gate requires a full 12 volts to drop so NEW batteries are important.

If you do NOT see the L.E.D. blink quickly, green then red, then you are not getting power to the gate. Make sure you have all 8 batteries installed correctly. Make sure all contacts on the batteries are touching each other, or the battery holder. Sometimes it helps to twist the battery holder with the batteries installed. (Twist like you were wringing out a wet rag. Not hard enough to break the unit, just enough to loosen the batteries in the holder). Make sure the spring in the battery holder is able to push the “AA” batteries to the opposite contact.

Test for power again by turning off the unit for 5 seconds and then turning it back on. If you see the L.E.D. blink quickly, green then red, then test the gate. If you DO NOT see the L.E.D. blink quickly, green then red, then call Risk Racing 704-508-1031.

◄My gate has power as tested above, but nothing happens when I press the wireless remote

If your Holeshot Starting Gate is not receiving a signal from the wireless remote (meaning; when you press the remote button, the LED on the gate does NOT blink), then this will mean one of three things. (If the LED on the gate DOES blink when you press the wireless remote, but the gate doesn’t drop, Skip to the next section)

Option 1: The battery in your wireless remote is dead. Replace the battery with a new battery and try again. The battery in the remote is a “23A”, which is common at most retail stores. It is like the battery in many garage door remote controls.

Option 2: The 8 “AA” batteries in your gate are dead, or have a bad connection. The Holeshot gate requires a total of 8 NEW “AA” batteries (Old batteries from around the house will not work. The gate requires a full 12 volts to drop so new batteries are important). Make sure you have all 8 batteries installed correctly. Make sure all contacts on the batteries are touching each other, or the battery holder.

Option 3: Your Holeshot Gate electronics “lost” the RF wireless signal from the wireless remote. If this has happened you can typically reset the wireless signal by following the steps below.

◄Instructions to reset the wireless remote frequency

Switch the power button on the base of the Holeshot to the "off" position
Remove the electronics unit (i.e. the battery pack casing) from inside Holeshot Starting Gate.
Unscrew the 4 screws on the back of the electronics unit, but **be careful not to yank it apart, because there are connecting wires inside** -In the upper right side of the unit, you'll see a small switch labeled "set"
While continuously holding down the "set" switch, turn the power button into the "on" position and let the lights flash through their sequence (**continue holding the "set" switch**)
When the lights stop flashing, release the "set" switch, and push the red button on the remote
The light should blink and turn off.
Press the remote button again. The LED should now start its usual sequence, which is green for 2 seconds, then blinking red, then a little clicking sound.
Reassemble the electronics.

◄The LED on my gate blinks when I press the wireless remote, but the gate still doesn’t drop

If the LED on the gate DOES blink when you press the wireless remote, but the gate still does not drop, please ensure that you have installed a total of 8 NEW “AA” batteries (Old batteries from around the house will not work. The gate requires a full 12 volts to drop so new batteries are important).

If after installing 8 NEW “AA” batteries, the gate still doesn’t drop with the wireless remote, please call Risk Racing: 704-508-1031

You will probably be asked to package up your electronics and wireless remote, and send them back to the Risk Racing offices to be tested, repaired, or replaced.

California Prop. 65 WARNING:
This product can expose you to Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Join the Risk Racing Community

Be in the know! Subscribe for exclusive offers, product launches, and insider tips. Don't miss out!

Email Sign Up

Idioma

Moneda