RR1 Ride-On Motocross Elevador / Stand by Risk Racing
0

Tu carrito está vacío

Elevador/soporte para motocross con conductor RR1

Título

Especificaciones
  • Modelo # 77829
  • Tamaño (plano): 36" x 17" x 9" (91,4 cm x 43,2 cm x 22,9 cm)
  • Peso: 17 libras (7,7 kg)
  • 1 año de garantía
Instrucciones

Salga de la pista y suba a su stand

¡Diseño patentado nuevo y mejorado! No más levantar objetos y gruñir, ni intentar patear un elevador de motocicletas debajo de tu bicicleta. Simplemente empuja o sube la bicicleta al elevador bajado. Cuando el neumático delantero toca la placa delantera, el elevador entra en acción y se eleva hasta la parte inferior del bastidor de la motocicleta. Pise el pedal y su bicicleta se elevará sin esfuerzo hasta una posición segura. Bajar la bicicleta es igual de sencillo y sin esfuerzo.





No se requiere elevación

Soporte elevador con operador a bordo RR1
Soporte elevador con operador a bordo RR1
Rodar sobre el soporte
Rueda o monta tu bicicleta en el soporte.
Secuencia de caminata RR1 paso 3
El soporte se levanta
A medida que la rueda delantera pasa por encima de la parte delantera de la RR1, el soporte se elevará hasta la parte inferior de la bicicleta.
Secuencia de caminata RR1 paso 4
Presione la palanca del pie
Pararse sobre la palanca del pie elevará la bicicleta del suelo.
Secuencia de caminata RR1 paso 5
la bicicleta esta arriba
La bicicleta está lista para trabajar o dejarla hasta la próxima carrera. Para mayor seguridad, coloque el pasador de bloqueo


Soporte elevador RR1 en el garaje con una moto de cross Honda roja encima


Construcción ligera

El tamaño grande y estable del RR1 y su construcción duradera de alta calidad pesan solo 17 libras.

Caballete elevador con operador a bordo RR1 de RISK


Primer plano del soporte elevador con operador a bordo RR1

Diseño estable

La gran parte superior de tracción de goma remachada cuenta con un orificio de drenaje de aceite. El pasador de bloqueo incluido permite mayor seguridad durante las reparaciones o el mantenimiento.



Verdadera innovación en el soporte para bicicletas MX


Características

Salga de la pista y vaya directamente a su ascensor

Construcción robusta y acabado en pintura en polvo.

Alfombrilla de goma grande y duradera en la parte superior para sujetar la bicicleta

Bloqueable en posición arriba o abajo

Orificio de drenaje de aceite

Ligero con solo 17 libras

Funciona con bicicletas específicas de MX de 85 cc a 450 cc.

El elevador o caballete de motocross más innovador del mercado



Qué está incluido

Soporte elevador con operador a bordo Risk Racing RR1
Soporte elevador con operador a bordo RR1

Vídeo de desembalaje


Revisión de MC ATV de las Montañas Rocosas




Proposición 65 de California ADVERTENCIA:
Este producto puede exponerlo al bisfenol A, que en el estado de California se sabe que causa defectos de nacimiento u otros daños reproductivos. Para obtener más información, visite www.P65Warnings.ca.gov .



Social

Tag Us To Get Featured

Join the convo with #RiskRacingMoto

Ride Off the Track and Onto Your Stand

New and Improved patented design! No more lifting and grunting, or trying to kick a motorcycle lift under your bike. Simply push or ride the bike onto the lowered lift. As the front tire touches the front plate, the lift goes into action rising to the bottom of the motorcycle frame. Step on the foot pedal and your bike will rise effortlessly into a secure position. Getting your bike down is just as effortless and simple.





No Lifting Required

RR1 Ride-On Lift Stand
RR1 Ride-On Lift Stand
Roll onto stand
Roll or ride your bike onto the stand
RR1 walk sequence step 3
Stand Lifts Up
As the front wheel goes over the front of the RR1 the stand will rise to the bottom of the bike
RR1 walk sequence step 4
Press foot lever
Standing on the foot lever will raise the bike off the ground
RR1 walk sequence step 5
Bike is up
Bike is ready to work on or leave until the next race. For added safety attach the locking pin


RR1 Ride-On Lift Stand in the garage with a red honda dirt bike sitting on it


Lightweight Construction

The RR1's large stable footprint and high quality durable construction, weighs in at only 17 lbs.

RR1 Ride-On Lift Stand by RISK


RR1 Ride-On Lift Stand close up

Stable Design

The a large riveted rubber traction top features oil drain hole. The included locking pin allows extra security during repairs or maintenance



True Innovation to the MX Bike Stand


Features

Ride off the track and directly onto your lift

Sturdy construction and powder coat finish

Large, durable rubber mat on top to grip the bike

Lockable in the up or down position

Oil drain hole

Lightweight at only 17 lbs

Works with MX-specific bikes 85cc-450cc

The most innovative motocross lift or stand on the market



What's Included

Risk Racing RR1 Ride-On Lift Stand
RR1 Ride-On Lift Stand

Unboxing Video


Rocky Mountain ATV MC Review




California Prop. 65 WARNING:
This product can expose you to Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.



Join the Risk Racing Community

Be in the know! Subscribe for exclusive offers, product launches, and insider tips. Don't miss out!

Email Sign Up Text Msg Sign Up