Lock-N-Load - Easy Moto Transportation | Risk Racing

Lock-N-Load

The Easiest Way to Transport your Bike

The “Lock-N-Load” Moto Transport System securely holds your motocross bike in your trailer without the use of tie-down straps, floor anchors or wheel chocks. It takes an enormous amount of pressure off of the fork seals during transit, and it frees up valuable space allowing the transport of more motorcycles or gear. Additionally, the Lock-N-Load can quickly be removed from the trailer floor by unscrewing the 4 thumb screws leaving only the low profile mounting plates. Each plate has a “D” ring for additional anchor points on your trailer floor.


Lock-N-Load Step 1 graphic says: insert bike, thighten knob

Rotate the knobs into the lock position and simply roll or ride your bike into the trailer until your foot pegs hit the open jaws of the Lock-N-Load.

Lock-N-Load Step 2 graphic says: press down, auto lock pin

Then step on the upper jaws and they will automatically lock into place.

Lock-N-Load Locking Step 3

For additional safety, insert the attached locking pins prior to transport. You can replace the locking pins with pad locks for added security and a theft deterrent.

Lock-N-Load Unlocking Step 1 graphic says: press down, loosen knob, auto lock pin unlocks

To release your bike, simply rotate the knobs into the release position and step on the top jaws.

Lock-N-Load Unlocking Step 2 graphic says: release bike

This will automatically release the jaws and free your motorcycle.

two Risk Racing lock-n-load systems installed in an enclosed trailer. one lock-n-load has a motocross dirt bike secured into it.

Available in Two Sizes

Standard

Designed to fit most FULL SiZE MX bikes
(or bikes with similar geometry)
*see specifications for size guide

full size dirt bike secured into a Risk Racing Lock-N-Load against a white studio background

Junior

Designed to fit most 85cc MX bikes
(or bikes with similar geometry)
*see specifications for size guide

youth size dirt bike secured into a Risk Racing Lock-N-Load against a white studio background

Features

Saves your fork seals

No more straps or wheel chocks

Load more bikes and gear in your truck, van or trailer

Quick release from the trailer floor

Extra trailer plates are available (Sold Separately)

TRUCK PLATES available for mounting in trucks (Sold Separately)


What's Included

three quarter pose of a Risk Racing Lock-N-Load against a white studio background
Lock-N-Load
Available in two sizes
Lock-N-Load Trailer Plates and mounting hardware on a white studio background
1x Pair Trailer Plates
plus mounting hardware


Accessories

Lock-N-Load Extra Trailer Plates and mounting hardware on white studio background
Extra Trailer Plates
Shop
Lock-N-Load Truck Bed Adapter Plates and mounting hardware on a white studio background
Truck Bed Adapter Plates
Shop


Specifications
  • Lock-N-Load
  • Model# 77849
  • Size: 20” x 10” x 18” (50.8cm x 25.4cm x 45.7cm)
  • Weight: 20lb (9.1kg)
  • 1 year warranty

Lock-n-load dimensions poster featuring semi transparent front facing dirt bike with text 18 inches thru 20 inches wide, 455 thru 510 mm wide, 15 inches thru 17.5 inches tall, 380 thru 445 mm tall, for accuracy measure both footpegs at the same time

Designed to fit most FULL SIZE MX bikes
(or bikes with similar geometry)

  • Lock-N-Load JUNIOR
  • Model# 00204
  • Size: 20” x 10” x 16” (50.8cm x 25.4cm x 40.6cm)
  • Weight: 19lb (8.6kg)
  • 1 year warranty

Lock-n-load junior dimensions poster featuring semi transparent front facing dirt bike with text 18 inches thru 20 inches wide, 455 thru 510 mm wide, 12.5 inches thru 14.75 inches tall, 320 thru 375 mm tall, for accuracy measure both footpegs at the same time

Designed to fit most 85cc MX bikes
(or bikes with similar geometry)

How to measure your bike

To properly measure your bike, ask for assistance to hold your bike perfectly vertical and use two tape measures at the same time to measure footpeg height. Make sure both measurements are the same. Feel free to contact us if you have any bike specific questions. Select your desired size in the online store when ordering.

The jaws are fairly large and we have found that they will fit most oversized or rotating aftermarket foot pegs on the market.

Instructions
Videos
Original Lock-N-Load Demo Video
Transport your MX Bike in a truck
FAQ
Click here to visit the frequently asked questions for this product.
Replacement Parts
Lock-N-Load Replacement Knobs
Replacement Knobs
Shop
Lock-N-Load Replacement Wing Nuts
Replacement Wing Nuts
Shop


California Prop. 65 WARNING:
This product can expose you to Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.