Features
Specifications
Included
Videos

- Reduce pressure on fork seals
- No more straps or wheel chocks
- Load more bikes and gear in your truck, van, or trailer
- Quick release from floor
- Fully adjustable
- Mounts in your trailer, truck, or van
- Extra mounting plates available
- Works with 2-strokes and 4-strokes
Available in Two Sizes
**Measure your bike before ordering to ensure fit**
- LOCK-N-LOAD PRO
- Model# 00174
- Size: 20” x 10” x 18” (50.8cm x 25.4cm x 45.7cm)
- Weight: 13.2lb (5.98kg)
- Plate Dimensions: 21.25” x 6.75” x 0.5” (54cm x 17.1cm x 1.3cm)
- 1-year warranty
Designed to fit 85cc to Enduro bikes
(or bikes with similar geometry)
Max Weight: 315lbs (142.9Kg)
- LOCK-N-LOAD PRO MINI
- Model# 00176
- Size: 20” x 10” x 16” (50.8cm x 25.4cm x 40.6cm)
- Weight: 12.6lb (5.71kg)
- Plate Dimensions: 21.25” x 6.75” x 0.5” (54cm x 17.1cm x 1.3cm)
- 1 year warranty
Designed to fit 50cc jr to 110cc MX bikes
(or bikes with similar geometry)
Max Weight: 200lbs (90.7Kg)

How to measure your bike

To properly measure your bike, ask for assistance to hold your bike perfectly vertical and use two tape measures at the same time to measure footpeg height. Make sure both measurements are the same. Feel free to call if you have any bike-specific questions. Select your desired size in the online store when ordering.

The jaws are fairly large and we have found that they will fit most oversized or rotating aftermarket foot pegs on the market.
- [1] Lock-N-Load PRO or Lock-N-Load PRO MINI
- [1] Mounting Hardware
- [1] Instruction Sheet
Installing Lock-N-Load Pro

Installing in truck bed

Unboxing Lock-N-Load Pro

Hennessey VelociRaptor 600 Sherco Edition

PANIC REV Motocross Trailer

The All New Lock-N-Load Pro

The Lock-N-Load Pro Moto Transport System securely holds your motocross bike in your trailer without the use of tie-down straps, floor anchors, or wheel chocks. It takes an enormous amount of pressure off of the fork seals during transit, and it frees up valuable space allowing the transport of more motorcycles or gear. Additionally, the Lock-N-Load can quickly be removed from the trailer floor by loosening the 2 screws and removing the struts, leaving only the low profile mounting plate.

Aluminum Construction

Built tough to transport bikes safely and lightweight enough to store on a shelf in your garage when not in use.

Lock-N-Load Pro adjustable dirt bike transport system in three quarter pose. White studio background.

Fully Adjustable

Adjust the new Lock-N-Load Pro on the fly to a large range of bikes with the new ratchet system.

Super close up of the jaw of a lock-n-load pro clamping down on a dirt bike's foot peg. Swing arm and rear tire fading out into the white studio background.

Rubberized Jaws

Changeable rubberized jaw pad keeps bike more secure and protects footpegs

Super close up of the jaw of a lock-n-load pro clamping down on a dirt bikes foot peg. Swing arm and rear tire fading out into the white studio background.

Close up of the ratcheting system on the Lock-n-load dirt bike transport system by Risk Racing. White studio background.

Switch Release

Simply flip the switch to lock or release the arm ratchet system. Flip the switch down when locking the bike down then flip the switch up to allow the jaws to release.

Black spray lined truck bed featuring two Lock-n-load mounting plates installed in between the wheel wells. Also features two ez jugs installed. White truck cab with huge Risk Racing sticker in back window.

Mounting Plate

The low-profile plate mounts into your truck, trailer, or van. Allows lateral adjustability for wider bikes.

How to install Lock-N-Load Pro

Wood Floor Installation and Use

Truck Bed Installation and Use

Available in Two Sizes

Bike Size Ranges: 50cc Jr to 110cc Trail (max weight: 200 lbs)

Bike Size Ranges: 85cc to Enduro (max weight: 315 lbs)

Feature Comparison of the Lock-N-Load Family


Features	Lock-N-Load Pro	Lock-N-Load Pro Mini	Lock-N-Load (Original)	Lock-N-Load Junior
MSRP	$299.99 USD	$299.99 USD	$199.99 USD	$199.99 USD
Buy Now	Add to cart	Add to cart	Add to cart	Add to cart
Saves your fork seals by reducing pressure on them	✔	✔	✔	✔
No more straps or wheel chocks	✔	✔	✔	✔
Load more bikes and gear in your truck, van, or trailer	✔	✔	✔	✔
Quick release from floor	✔	✔	✔	✔
Fully adjustable	✔	✔	✘	✘
Easy storage when not in use	✔	✔	✘	✘
Types of bikes that can be hauled	Generally most medium to full size dirt bikes, trial bikes and motocross races bikes. See details for proper bike fitment	Generally most small size dirt bikes, trial bikes and motocross races bikes. See details for proper bike fitment	Full size MOTOCROSS SPECIFIC RACE BIKES only	Generally 85cc Motocross Race Bikes only (Including the CRF150R)
Extra mounting plates available (Sold Separately)	✔	✔	separate plates for truck vs. trailer	separate plates for truck vs. trailer
Works with 2-strokes and 4-strokes	✔	✔	Limited - See details for proper bike fitment	Limited - See details for proper bike fitment
Dirt Bike Maximum Weight	315 lbs	200 lbs	Restricted by bike size, not weight	Restricted by bike size, not weight
Dirt Bike Minimum Peg Width	12"	12"	18"	18"
Dirt Bike Maximum Peg Width	21"	21"	22"	22"
Dirt Bike Minimum Peg Height	12.5"	8.5"	15"	12.5"
Dirt Bike Maximum Peg Height	18"	12"	17.5"	14.75"
Fitment Guides
Size of the Lock-N-Load	20” x 10” x 18”	20” x 10” x 16”	20” x 10” x 18”	20” x 10” x 16”
Weight of the Lock-N-Load	13.2lb	12.6lb	20lb	19lb

What's Included

Unboxing video

Lock-N-Load Pro

Available in two sizes
Mounting hardware included

Accessories

Additional Mounting Plate

Shop

Replacement Rubber Jaw

Shop

California Prop. 65 WARNING:
This product can expose you to Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.