Buy a JAC V3 Ripper Combo Kit and Get a FREE Auto Roll-Off During our Monthly Sale!!

Features
Specifications
Included
*Compatibility

- Clear goggles in as little as 1 second
- No more taking hands off handlebar to clear roll-off
- Use almost any roll-off goggle*
- Manual override incase of mechanical failure or damage
- Quick set up
- Auto-Burst Mode or Momentary/Continuous Mode
- Sync multiple Rippers to one remote for quick change in race situation
- Micro-USB rechargeable
- Battery life lasts up to 10 rolls
- Weather Proof
- Lightweight at only 4.1oz (116g)
- The Ripper
- Handlebar Mount Wireless Remote
- RF wireless transmission
- Micro Motor
- Strap Mount accommodates straps up to height of 2 inches (50mm)
- Modes
  - Auto-Burst Mode
  - Momentary/Continuous Mode
- Ripper Main Unit Battery
  - Lithium-ion Rechargeable Battery Pack (Integrated)
  - 3 LEDs = 100%, 2 LEDs = 66%, 1 LED = 33%, Blinking LED <10%
  - Battery Life: Up to 10 full rolls
- Remote Battery
  - CR2032 Lithium Battery (replaceable)
- Dimensions
  - The Ripper
    - Size: 4.4” x 1.5” x 2.75” (11.2cm x 3.8cm x 7cm)
    - Main Unit Weight: 4.1oz (116g)
  - Handlebar Remote
    - Size: 1.5” x 1.7” x 1.9” (3.9cm x 4.4cm x 4.7cm)
    - Weight: 0.6oz (17g)
- Model# 00395
- 1 year warranty
- [1] The Ripper
- [1] Handlebar Wireless Remote
- [1] Instruction Sheet
Confirmed Roll-Off Goggle Compatible:
- Risk Racing J.A.C. V3 Goggles
- 100% Accuri Forecast
- 100% Strata SVS
- 100% Youth Accuri Forecast
- 100% Youth Strata SVS
- EKS Zip Off
- Fly Racing Goggle Roll-Off System
- Fox Air Defence
- Fox Vue
- Leatt 5.5 Roll-Off System
- Leatt 6.5 Roll-Off System
- Rip N Roll Platinum
- Rip N Roll Colossus
- Rip N Roll Hybrid
- Scott Fury
- Scott Hustle X
- Scott Split OTG WFS
- Scott Youth Buzz Works
- Smith Roll Offs Kit
- THOR Sniper with Total Vision System
Incompatible
- Oakley Airbrake
- Scott Prospect Frame

The Goggle Roll-Off System Revolutionized

The Ripper is a revolutionary system for the Roll-Off Goggle. With the press of the wireless handlebar button, The Ripper rapidly pulls the cord on most roll-off systems to clear the riders vision in less than a second.

Automated Goggle Roll-Off System

The Ripper

The wireless main unit replaces the need to take your hand off the handlebar to reach up and pull the cord on the roll-off system. Not only is this safer, but faster, and means you're free to clear your vision whenever you NEED to!

Wireless Handlebar Remote

The remote sits conveniently next to your grip, allowing easy access to press the button.

Rapid Visibility

With a tap of the button, the arm pulls the cord in a rapid-fire motion, clearing vision in less than 1 second*

Keep Your Hand on the Bar

With the Ripper you no longer need to take your hand off the the handlebar to clear your vision!

Quick Setup

It takes minutes to setup the Ripper and operation is as easy as pushing a button.

Mount to strap

Feed the strap through the strap mounts, then slide the Ripper forward until it touches the back of the roll-off canister.

Hook Pull Arm

Pull out the pull-cord and hook the Ripper pull arm over the cord.

Set Mode

Turn on the unit then quick press the sync button to change between Auto-Burst or Momentary/Continuous mode.

Mount Remote

Place wireless remote button in desired location, then screw back mount and tighten down.

Manual Override

The pull cord is still operational even when The Ripper is attached.

Sync Multiple Remotes

Sync the Ripper to multiple Wireless Remotes for multiple bike setups.
Extra buttons available

Universal Mount

Universal goggle strap mount works with your favorite goggle roll-off system*.

Modes

Auto-Burst

Press Remote button to activate the Ripper for approx. 1.5 seconds. Use this mode to clear vision automatically with a tap of the button.

Momentary / Continuous

Press & HOLD Remote button to activate the Ripper for desired time (up to 5 seconds). Use this mode to have more control of roll usage.

Rechargeable

The Ripper will typically last up to 10 rolls before needing to be recharged via the micro-USB port on the main unit. Battery level is indicated by the 3 LEDs

Lightweight

At only 4.1oz (116g) it's lighter than the typical action camera setup and almost half the weight once you include action camera mounting hardware.

Features

Clear goggles in as little as 1 second
No more taking hands off handlebar to clear roll-off
Use almost any roll-off goggle*
Manual override incase of mechanical failure or damage
Quick set up
Auto-Burst Mode or Momentary/Continuous Mode
Sync multiple Rippers to one remote for quick change in race situation
Micro-USB rechargeable
Battery life lasts up to 10 rolls
Weather Proof
Lightweight at only 4.1oz (116g)

What's Included

In the Box

The Ripper
Wireless Handlebar Remote
Instruction Sheet

Unboxing Video

California Prop. 65 WARNING:
This product can expose you to Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Currency

Subscribe

Currency